|
STRUCTURE
Moisture-Proof framework, resting on a load-bearing wall, with a prefabricated concrete block, a self-resistant tic beam, and a concrete small vault, in the framework of the fisrt floor.
"In-situ" reinforced concrete pillars and beams, a semiresistant tie beam and a concrete vault, in the rest of the frameworks. Leaning framework on the roof, with the same features as the previous ones. All this according to the plans and costings.
ROOFS
On leaning roofs, with mixed tiles placed with cement mortar over a framework insulated with extruded porexpan and a protection mortar bed.
On flat roofs, formation of a slope by means of cell concrete 12 cm thick on average and reinforced asphalt netting with fibreglass of 4 kg/m2 finished with ceramic tiles with gap joints.
BRICKWORK
Facade made up of ceramic triple perforated bricks, the chamber plastered on the inside with cement mortar and the interior sheet made up of double perforated brick.
Interior partitions with ceramic double perforated brick 7 cm thick.
COVERINGS
The exterior with one-layer filler, "with a scraped finish or similar, the colour to be chosen by the Architect or the Quantity Surveyor.
The interior with plaster in vertical and horizontal faces "with edge protectors.
Ceramic tiling from the floor to the ceiling in the kitchen and the bathrooms, with friezes and special pieces.
FLOORING
The first floor and the stairs with Crema Elvira marble or similar.
The top floor with big pieces of top-quality earthenware, with a skirting board of the same features. The bathroom with a top-quality earthenware different from the one used in the rest of the house.
ALUMINIUM CARPENTRY
Exterior carpentry of coloured lacquered aluminium, with S-800-senes cross sections that are ready to install 4+6+4 climalit glazing. In the spaces of the first floor, climalit glazing without majorcan blind and with stadip exterior sheet, made up of two glasses of 3+3, a Butiral intermediate sheet, a chamber of 6 mm and a interior sheet of 4 mm (antitheft glass ).
Mallorquina model shutters in the bedrooms -with mosquito nettings, in coloured lacquered aluminium, layout according to the plans and costings.
Exterior handrails in wood-coloured aluminium, to be glazed, with stadip glass model 3 + 3, with a butiral intermediate sheet.
Interior handrails made up of steel, designed according to the plans and costings.
WOODEN CARPENTRY
Safety access doors, assembly according to the plans and costings, with an anchor of 5 points.
Coloured lacquered interior doors made up of wood, monoblock model, with headings and iron fittingsfor hanging and locking.
Wardroves decorated on the side, with a storage cupboard, hanging rod and drawers.
Exterior arcades in the terrace and the balconies made up of pine beams and tie beams treated by autoclave, polished and decorated with studs, according to the plans and costings, a plywood board and a top finish with mixed tile.
Pine beams treated by autoclave and polished in the top terrace.
PLUMBING INSTALLATION
Installation for cold and hot water with copper pipes.
Mixed boiler both for sanitary hot water and heating.
Heating installation with fitted copper pipes and insulated floors with radiator.
PVC plumbing installation, with connections under the insulated floors.
White china toilet, Dama de Roca or similar, and chromium-plated mixer taps.
GAS INSTALLATION
Inside the houses, gas installation is made up of copper pipes, the diameters and layout according to the plans and costings, in accordance with the supplier's rules.
GAS TANK
Gas supply for the houses is made from a tank buried inside each block. This tank will have a capacity of 10.000 1 and will be 1.85 m in diameter and 5.80 m long, according to plan N° D.2. Specifications.
Safety distances will be those appearing on the M.D. Dated on 28/01/86 for the installation and storage of petroleum liquified gases. These distances are: for buried and. semiburied tanks of 4.00 m, from the orificies to the property limit, of 0.80 m around the projection on the tank plot. | 
